• Please ask for the shown sets and variations for special offer

  • Origin: Frankfurt, Germany\ \ Model: HZ-50SG\
  • \ Air inlet size: 1/4 (in)\ \ Size: 1/2 (in)\ \ Air consumption: 0.2 (m3/min)\
  • \ Idling speed: 8500 (r/min)\ \ Air pressure: ≥0.6MPa\ \ Torque: 6300 (n. m) (630 kg)\
  • \ Pipe inner diameter: 8-10MM\ \ Set weight: 5 kg\ \ Weight: 3 (kg)\

  • Package description:

  • (Cartons), (set in plastic box) jackhammers into quick-connect small-tailed one, Come on Kettle one, single Hexagon wrench Weight approximately 3kg. Set weighs about 5 kg

  • Products:

  • Recommended configuration:
  • Air compressor exhaust volume ≥ 0.6 cubic meters/per minute

  • Pipe inner diameter of ≥10MM

  • Pipe length ≤20m

  • Air pressure ≥1.0MPa
  • Write a review

    Please login or register to review

    German industrial 1/2 530 kg of torque wrench small wind Cannon pneumatic tools pneumatic drill

    • $45.53

    Available Options

    This product has a minimum quantity of 21

    Viewing This - Also Looked At....

    Pull Cap gun riveters rivets pneumatic tool rivet guns rivet nut gun new Manual Usage
    Small wind Cannon wrench pneumatic tools pneumatic drill aftermarket torsion strength 1/2 suit jackhammers twin hammer air impact wrench

    Inch To Centimeter Conversion

    Please carefully observe measurements and if given in Inches or Centimeter. Our standard measurement is in centimeter. However man garments are shown in Inches for USA. please always compare with your regular sizes you do wear.

    You can convert measurements here easily for your reference (new window)